TIG 200P AC/DC
INVERTER DC TIG/MMA WELDING MACHINE – IGBT TYPE
- Advanced IGBT inverter techno logy delivers superior TIG performance
- Multifunction: MMA, DC TIG, AC TIG, Pulse TIG
- AC square wave is especially suitable for welding aluminum and its alloy
- DC square wave is suitable for welding stainless steel, alloy steel, carbon steel, copper and other non-ferrous metals
- 2T/4T Function selectable on the front panel
- Foot pedal to control current remotely is optional
- Dig ital instrument for the welding current
- Accurate adjustment can achieve great penetration, aesthetic appearance of weld seam and low consumption of electrode
- New design air duct increase the duty cycle, make it possible to work for a long time with big current.
- Integrated with DC TIG and Pulse TIG functions
- AC wave control circuit, greatly improve the arc stabilizing ability of small current.
- The layered structure of the first and second inverters,
do a favor lo the dust prevention. reliability and maintenance.
Accessories
earth clamp x 1pcs,
cable jolnt x 2pcs,
Inner hexagon spanner x 1pcs,
grounding cabfe 3meters.
TIG torch x 1set
Varilni aparat TIG 200P AC/DC združuje vse funkcionalnosti TIG in MMA varjenja
Varilcu omogoča varjenje širokega nabora kovin, kot je jeklo, nerjavno jeklo, aluminij, magnezij, aluminijeve zlitine, titan ter baker. Opremljen je z 32 bitnim mikroprocesorjem, ki mu omogoča celoten nabor nastavitev za dosego kar najboljših rezultatov varjenja.
Varilni aparat TIG 200P AC/DC podpira varjenje z enosmernim in izmeničnim varilnim tokom. Z enosmernim varilnim tokom varimo vsa jekla, nerjavna jekla, specialne kovine in njihove zlitine, z izmeničnim tokom pa aluminij, magnezij in njune zlitine.
Varilni aparat TIG 200P AC/DC je zaradi svojih lastnosti in nastavljivosti primeren za vsakega varilca in za vsako profesionalno ali domačo delavnico.
Welding
Material: Carbon steel, Stainless steel, Low alloy steel
Sheet thickness: 1.5 – 10 mm
Stick diameter: 2.5 / 3.2 / 4.0 mm
Current range: 20 – 200 A
Specification
Input voltage: 1PH AC 220 V ± 15 %
Input power: 4.8 @TIG; 6 @MMA
Input current: 22A@TIG; 27A@MMA
Rated output: 17.6 V / 190 A
Output current: 5 – 190 A
No-load voltage: 56 ± 5 V
Duty Cycle % (40°C 10min): 190 A 30 %, 104 A 100 %
Efficiency: 70 %
Protection grade: IP21
Insulation grade: F
Net weight: 7.1 kg
Gross weight: 9.1 kg
Dimension of machine: 410 x 162 x 305 mm
Dimension of package: 480 x 240 x 408 mm
Power supply voltage: Single-phase AC 220V±15%
Power supply frequency: 50/ 60 HZ
Rated input current: 27 A @ MMA; 23 A @ TIG
Output current regulation: 10 – 200 A
Open circuit voltage: 56 ± 5 V
Rated working voltage: 18 V
Cleaning width: .40~40 %
Duty ratio: 10-90 %
Gas preflow time: 0-15 S
Pulse frequency (low frequency): 0.2-20 HZ
Base current: 10-200 A
Initial current: 10-200 A
Crater current: 10-200 A
Remote control: Yes
Arc striking means: High frequency arc striking
Efficiency: 70 %
Duty cycle: 40 %
Power factor: 0.93
Insulation grade: F
Shell protection grade: IP21
Net weight: 14.75 kg
Gross weight: 18.1 kg
Overall dimensions: 570 x 260 x 440 mm
Maximum welding thickness: 15 mm
Related products
TIG 200P DC
